BMW K1300S, 2011
Specifications
Engine
Electrical system
Chassis / brakes
1) According to guideline 93/93/EWG with all fluids, fuelled with at least 90% of usable tank volume
2) Unladen weight without fluids
- Type Water-cooled 4-stroke in-line four-cylinder engine, two overhead camshafts, four valves per cylinder
- Bore x stroke 80 mm x 64.3 mm
- Capacity 1,293 cc
- Rated output 129 kW at 9,250 rpm
- Max. torque 140 Nm at 8,250 rpm
- Compression ratio 13.0 : 1
- Mixture control / engine management Electronic intake pipe injection, digital engine management including knock sensor (BMS-K+)
- Emission control Closed-loop 3-way catalytic converter, emission standard EU-3
- Performance / fuel consumption
- Maximum speed Over 200 km/h
- Fuel consumption per 100 km at constant 90 km/h 4.7 l
- Fuel consumption per 100 km at constant 120 km/h 5.3 l
- Fuel type Unleaded super and premium, octane number 95-98 (RON) (knock sensor; rated output at 98 RON)
Electrical system
- Alternator three-phase alternator 580 W
- Battery 12 V / 14 Ah, maintenance-free
- Power transmission
- Clutch Multiple-disc clutch in oil bath, hydraulically operated
- Gearbox Constant mesh 6-speed gearbox
- Drive Shaft drive
Chassis / brakes
- Frame Bridge-type frame, cast aluminium, load-bearing engine
- Front wheel location / suspension BMW Motorrad Duolever; central spring strut
- Rear wheel location / suspension Cast aluminium single-sided swing arm with BMW Motorrad Paralever; central spring strut with lever system, spring pre-load adjustable (continuously variable) at hydraulic handwheel, rebound damping adjustable
- Suspension travel front / rear 115 mm / 135 mm
- Wheelbase 1,585 mm
- Castor 104.4 mm
- Steering head angle 60.4°
- Wheels Cast aluminium wheels
- Rim, front 3.50 x 17"
- Rim, rear 6.00 x 17"
- Tyres, front 120/70 ZR 17
- Tyres, rear 190/55 ZR 17
- Brake, front Dual disc brake, floating brake discs, diameter 320 mm, 4-piston fixed calipers
- Brake, rear Single disc brake, diameter 265 mm, double-piston floating caliper
- ABS BMW Motorrad Integral ABS (part-integral)
- Length 2,182 mm
- Width (incl. mirrors) 905 mm
- Height (excl. mirrors) 1,221 mm
- Seat height, unladen weight 820 mm (low seat: 790 mm)
- Inner leg curve, unladen weight 1,810 mm (low seat: 1,750 mm)
- Unladen weight, road ready, fully fuelled 1) 254 kg
- Dry weight 2) 228 kg
- Permitted total weight 460 kg
- Payload (with standard equipment) 206 kg
- Usable tank volume 19 l
- Reserve approx. 4.0 l
1) According to guideline 93/93/EWG with all fluids, fuelled with at least 90% of usable tank volume
2) Unladen weight without fluids